Error codes konica minolta

Code: C3201, C3202
Description:
• C3201: Fusing motor failure to turn • C3202: Fusing motor turning at abnormal timing
• C3201: The motor lock signal remains HIGH for a predetermined continuous period of time while the motor is turning. • C3202: The motor lock signal remains LOW for a predetermined continuous period of time while the motor remains stationary.
Causes:
• Fusing motor (M30) • MFP board (MFPB)
Remedy:
1. Check the connector between M30-MFPB CN28E for proper connection and correct as necessary. 2. Check the loading status of the fusing unit drive, and correct the error as necessary. 3. M30 load check • Check code: 45 • Multi code: 1, 2, 3, 4, 5, 6 • Control signal: MFPB CN28E-1 (DC24V), MFPB CN28E-4 (REM), MFPB CN28E-7 (LOCK) • Location of electrical component: 7-K 4. Replace M30. 5. MFPB F16E conduction check 6. Replace MFPB. 7. DCPU F851 conduction check. 8. Replace DCPU.